Troubleshoot Wi-Fi and Network Connection Problems

Troubleshoot Wi-Fi and Network Connection Problems
Overview

If your device cannot connect to Wi-Fi, loses its network connection, or shows that it is connected but cannot access the internet, use the steps below to identify and resolve common connection problems.

The troubleshooting steps depend on whether you are using a personal device or Polk State-owned equipment.

Start Here

Before changing any network settings, check the following:

  1. Make sure Wi-Fi is turned on and Airplane Mode is turned off.
  2. Confirm that the device is connected to the correct wireless network.
  3. Open a web browser and try visiting more than one website.
  4. Turn Wi-Fi off, wait approximately 10 seconds, and turn Wi-Fi back on.
  5. Restart the device and try connecting again.
Make Sure You Are Using the Correct Network
Network Used For
POLKSTATE-EQUIPMENT Authorized Polk State-owned and managed devices. Approved devices should connect automatically.
POLKSTATE-CONNECT Personal, guest, and other devices using Polk State's public wireless network.

Do not manually configure POLKSTATE-EQUIPMENT.

If a Polk State-owned device does not automatically connect to POLKSTATE-EQUIPMENT, contact Technology Services. The device may need to be reviewed for network authorization.

I Can See POLKSTATE-CONNECT, but I Can't Connect

For a personal or guest device, try the following:

  1. Turn Wi-Fi off and back on.
  2. Open the device's Wi-Fi settings.
  3. Use the option to Forget or remove POLKSTATE-CONNECT.
  4. Search for available wireless networks again and select POLKSTATE-CONNECT.
  5. Restart the device if the connection still fails.

Public Wi-Fi Security

POLKSTATE-CONNECT is an unsecured public wireless network. Do not disable security protections, install unknown software, or accept unexpected security or certificate warnings just to make the device connect.

Wi-Fi Says Connected, but the Internet Doesn't Work

If your device shows that Wi-Fi is connected but websites or online services do not work:

  1. Try opening two or three different websites to determine whether the problem affects one website or the entire connection.
  2. Close and reopen the web browser.
  3. Disconnect from Wi-Fi and reconnect.
  4. Restart the device.
  5. Check whether other devices in the same location are experiencing the same problem.

Check another device if possible

If other devices are working normally in the same location, the issue is more likely limited to your device. If several devices are affected in the same area, report the location to Technology Services.

Wi-Fi Is Slow or Keeps Disconnecting

If the connection is slow or repeatedly disconnects:

  1. Move to another location in the room or building and test the connection again.
  2. Restart the device.
  3. Check whether the problem occurs with more than one website or application.
  4. Check whether other nearby devices are experiencing the same problem.
  5. Make note of the campus, building, room, and approximate time the issue occurred.
I Don't See Any Wi-Fi Networks

If your device does not show POLKSTATE-CONNECT or any other available wireless networks:

  1. Confirm that Wi-Fi is turned on.
  2. Confirm that Airplane Mode is turned off.
  3. Turn Wi-Fi off, wait approximately 10 seconds, and turn it back on.
  4. Restart the device.
  5. Move to another area and check for available networks again.

If your device still cannot detect any wireless networks while other devices nearby can, the problem may be specific to the device.

Polk State-Owned Device Isn't Connecting

Authorized Polk State-owned devices should automatically connect to POLKSTATE-EQUIPMENT.

If a Polk State-owned device does not connect:

  1. Confirm that Wi-Fi is turned on.
  2. Restart the device.
  3. Check whether POLKSTATE-EQUIPMENT appears as an available wireless network.
  4. Contact Technology Services if the device does not connect automatically.

Important: Do not attempt to manually change the managed wireless configuration on Polk State-owned equipment.

Having Trouble with GlobalProtect VPN?

GlobalProtect requires a working internet connection before the Polk State VPN can connect.

If GlobalProtect will not connect:

  1. Disconnect from GlobalProtect.
  2. Confirm that regular websites open without the VPN.
  3. After confirming that your internet connection works, open GlobalProtect and try connecting again.
  4. If normal internet access works but GlobalProtect does not, use the VPN support process rather than continuing to troubleshoot Wi-Fi.
Before Submitting a Ticket

Gathering a few details can help Technology Services identify the problem more quickly.

Make note of:

  • The type of device experiencing the problem.
  • Whether the device is Polk State-owned or personal.
  • The wireless network you are trying to use.
  • The campus and building where the problem occurred.
  • The room number or specific area, if known.
  • The approximate time the problem occurred.
  • The exact error message displayed.
  • Whether other devices in the same location are also affected.
Need Help?

If the connection problem continues after completing the troubleshooting steps above, submit a Technology Services Wi-Fi / Network support ticket.

Polk State-owned equipment: If the device does not automatically connect to POLKSTATE-EQUIPMENT, mention this in the support ticket so Technology Services can review the device's network authorization.

Submit a Wi-Fi / Network Support Ticket

Tip: Providing the campus, building or room, device type, approximate time of the problem, and exact error message can help Technology Services identify the issue more quickly.